we recommend that you maintain your Nespresso coffee by following these 4 tips for use.
We’ll take a look at:
- 1 Tips for using your Nespresso machine
- 2 How to work a Nespresso machine?
- 3 F.A.Q
Tips for using your Nespresso machine
Tip #1. Regularly check the water quality.
To begin with, the quality of the water being essential to sublimate all the aroma of your espresso, we advise you to use water with low mineral content and to renew it daily.
Tip #2. Eject your capsule regularly.
After each use, it is important to eject the Nespresso capsule that has just been used so that it does not remain in the extraction system. We advise you to regularly empty the capsule tray and to avoid overflowing water, empty the drip tray.
Tip #3. Rinse the drainage system.
After the last use of your machine, pour the equivalent of a cup without capsules to avoid coffee grounds in the drainage system.
Tip #4. Descale your Nespresso machine
Finally, to maintain the optimal temperature and quality of your espresso, descale your Nespresso regularly. We do not recommend the use of vinegar, it could damage the seals of your machine.
How to work a Nespresso machine?
- To program the length of a small cup press and hold this button.
- To program the length of a large cup, the manipulation will be the same but with the large cup button. As soon as the cup is filled to your liking, release the button. Your machine is now programmed.
Find out how to program and adjust the length of your cup with the “small-cap” and “large cup” functions of your machine. This function is available for all automatic Nespresso machines.
On Nespresso automatic machines you will find a “small cup” button and a “large cup” button. They work in the same way for the setting of your machine and allow you to prepare either an espresso.
Step #1. The preparation. Nespresso machine
- turn on your machine and wait for the buttons to stop flashing
- Open the handle and insert a Nespresso capsule. Close the handle
- place your cup
Step #2. Programming. Nespresso machine
To program the length of a small cup press and hold this button.
To program the length of a large cup, the operation will be the same but with the large cup button. As soon as the cup is filled to your liking, release the button. Your machine is now programmed.
From now on, when you press the button with a single press the coffee will automatically flow at the desired level. You can now enjoy one of the sixteen Nespresso Grand Crus specially designed for your machine to ensure a perfect cup of coffee.
How to use the Nespresso Magimix machine?
Press either the G button (up to 40ml) or the right button (up to 110ml) for 25 seconds. To program the doses you want, you must press the button during the first use until the desired quantity is required. During the next use, the quantity will stop automatically.
How do I reset a Nespresso Krups coffeemaker?
With the machine turned off, press and hold the Espresso button for 3 seconds.
How do I descale a Nespresso Krups coffeemaker?
1. Empty the capsule tray and drip tray.
2. Place a container under the coffee outlet
3. Fill the tank with water and descaler.
4. Switch on the machine.
5. Activate descaling mode by pressing the 3 keys.
6. Open the sliding window of the machine.
7. Press the 3 keys simultaneously.
How do I reset Nespresso Pixie?
Reset To Factory Settings – Nespresso Pixie Clips Instruction Manual. Stop the machine. Switch the machine off. Switch the machine off.
How do I reset Nespresso Vertuo?
Reset To Factory Settings – Nespresso VERTUO PLUS User Manual.
NOTE: To select special functions, press the lever down: 1 time for ‘Descaling’. 2 times for ‘Empty’ mode